Dyson Airblade V hand dryer (Nickel)
Engineered for hygienic performance.
Designed for compact spaces.
• 12 second dry time1• Hygienic performance with HEPA filter2
• 5-year parts warranty, easy self-service
Proven hygienic by independent testing
All Dyson Airblade™ hand dryers undergo rigorous testing by Dyson. The impact of drying hands has been tested in universities and published in international journals.
Key features
Create space in your washroom
At just 10cm deep, the Dyson Airblade V hand dryer is slim and compact, so it leaves more room in your washrooms. And because it fixes to a back plate, it allows easy, self-service installation, maintenance and replacement.
Quietly refined
With reprogrammed digital motor technology and precision air apertures, the 1000W Dyson digital motor V4 makes the Dyson Airblade™ V hand dryer 35% quieter than its predecessor.
Key technology
-
Airblade™ technology scrapes away water at 690km/h
HEPA-filtered air is channelled up the machine by the motor, forcing sheets of filtered air through precision apertures at high pressure. Water is scraped from the hands at 690km/h.
-
The Dyson digital motor V4
The reprogrammed Dyson digital motor V4 uses digital pulse technology to draw up to 20 litres of air per second through the machine, for fast hand drying.
-
HEPA filter
The HEPA filter captures 99.95% of particles2 as small as 0.3 microns from the washroom air, before it's blown onto hands. So hands are dried with cleaner air, not dirty air.
Additional features
-
Quick drying
A reprogrammed motor and re-engineered airflows mean the Dyson Airblade V hand dryer is quieter than ever, yet still dries hands in just 12 seconds.1
-
35% quieter
With reprogrammed software, the 1000W Dyson digital motor V4 makes the Dyson Airblade V hand dryer 35% quieter than its predecessor.
-
Less waste
Up to 78% less expensive to run than other hand dryers. Up to 98% less than single-use paper towels, with up to 81% less CO2.3 Creating a better environment in your washrooms and in the world outside.
Accreditations
-
NSF
The only hand dryer certified by the NSF International Protocol P335.
-
Carbon Trust
All Dyson Airblade™ hand dryers are certified by the Carbon Trust.
Specifications
-
Weight
2.8kg
Airspeed at apertures
690km/h
Operating airflow
20 l/s -
HEPA filter
Yes
Dry time
12 seconds
Motor speed
83,000 rpm -
Width
234mm
Height
394mm
Length
100mm -
Decibel level
79dB -
-
Frequently asked questions
No. Warm air hand dryers can encourage the growth of bacteria dried into hands. The Dyson Airblade™ V uses a grade 13 standard HEPA filter that captures 99.95% of particles as small as 0.3 microns from the washroom air, before it's blown on to hands.
The Dyson Airblade™ V is Doc M compliant.
Splashbacks are required for porous walls.
Explore the Dyson Airblade™ hand dryer range
2 HEPA filter tested to EN1822-5, by an independent testing laboratory, under prescribed test conditions.
3 The environmental impact of electrical appliances and paper towels was measured by Carbon Trust. The calculations were produced using the software Footprint Expert Pro, based on product use over 5 years and using weighted averages of individual countries of use. Dry times for product were evaluated using DTM 769. Average electricity price US$ 0.1/kWh for the US market, as of May 2019. For calculations visit www.dyson.com.sg/calcs
Quiet Mark is a registered trademark of the Noise Abatement Society.