All about your Dyson WashG1™ wet floor cleaner
Welcome to your dedicated Owner's space. Here you'll find helpful set-up tips and maintenance advice, how-to videos, and your user manual.
Register to activate your guarantee for instant access to how-to guides. You can also receive tailored support, straight to your inbox.
Getting set up
Download user manual
Everything you need to know about your Dyson WashG1™ wet floor cleaner.
61.4MB
Dock set-up and charging
A docking station is included to store and charge your machine between cleans.
-
Setting up the floor dock
It's vital to set up your floor dock correctly to ensure the machine is sufficiently charged for each clean.
-
Charging your battery
It's important to fully charge the battery before first use to help future battery monitoring and run time.
Know your controls
Dyson WashG1™ wet floor cleaner has an LCD screen to help you monitor your clean. It also has buttons for hydration modes and to power on/off.
Choose hydration level
Press the mode button to cycle through the menu:
1. Light cleaning and small spills.
2. Debris, hair and moderate stains.
3. Tough, dried-on stains and messy spills.
In any mode, you can press MAX for extra hydration on stubborn dirt.
Alerts on the LCD screen
The LCD screen displays helpful alerts to assist cleaning and maintenance, such as run time, battery life, emptying the Dirty water tank, and replacing the microfibre rollers.
Care after every clean
A few routine steps will help to maintain your machine's performance for years to come. Watch our video guides below.
Running the Self-clean cycle
1. Empty the Debris tray and water tanks.
2. Fill Clean tank to MAX.
3. Select Self-clean to start the cycle.
4. Empty the Debris tray and water tanks.
In just 140 seconds, your machine is ready. Simply refill with clean water before its next clean.
Emptying the Dirty water tank and the Debris tray
The LCD screen alerts you when the Dirty water tank is full. And our hygienic no-touch disposal lets you simply pour away the dirty water, then empty any Debris tray contents straight into the bin.
Deep cleaning and maintenance
Washing the water tanks
Regularly rinse both dirty and clean water tanks, and dry with a cloth. The smooth inner surfaces make cleaning easy and reduce dirt build-up.
Cleaning the Debris tray
Stones or other small debris may become trapped. If this occurs, remove by following these simple steps.
And to remove any limescale, we recommend cleaning the filter mesh every six months.
-
1. Remove the red inner section
Check for trapped debris in the small crevices on each side of the red surface, and remove.
-
2. Rinse under a tap
After removing trapped debris, rinse both inner and outer parts of the Debris tray under a tap.
-
3. Dry thoroughly
Wipe both parts with a cloth to remove any remaining debris and excess water. Dry thoroughly before reassembling into the cleaner head.
Washing the microfibre rollers
After every few uses, check the rollers. If there's any debris, it's time to wash your rollers manually:
Remove debris, wash rollers with warm water and detergent. Rinse and squeeze to remove excess water, and leave to dry thoroughly before use.
Replacing the microfibre rollers
Rollers last for around 25 hours, depending on usage. Check the rollers' lifetime counter on the LCD screen menu.
Shop direct here at Dyson.com.sg for genuine rollers.
Additional Machine Support
-
How to replace the Debris tray rubber strips
-
How to replace the handle
-
How to replace the Check valve and cover
Frequently asked questions
No. Vacuuming is not necessary, as Dyson WashG1™ wet floor cleaner picks up and separates both wet and dry debris, and hair.
Dyson WashG1™ wet floor cleaner is Dyson’s first dedicated wet floor cleaner for hard floors, picking up both wet and dry debris. You will need a vacuum cleaner for your carpets, upholstery, mattresses, pet beds, countertops, and inside your car.
No, Dyson WashG1™ wet floor cleaner is Dyson’s first dedicated wet floor cleaner for hard floors, picking up both wet and dry debris.
Dyson WashG1™ wet floor cleaner has counter-rotating motorised rollers – instead of vacuum suction – to separate large debris from liquids. Vacuum motors may also expel air back into the room which could cause odours. It also has a unique separation system where secondary brush bars with nylon bristles remove large debris and hair from the rollers – while extraction plates squeeze off moisture. Debris collects in a removable tray, and waste liquid is pumped into a separate Dirty water tank.
The Dyson WashG1™ wet floor cleaner is our first dedicated wet floor cleaner, engineered to wash hard floors. The Dyson Submarine™ machine is Dyson’s multifunctional vacuum cleaner, which includes a precision-engineered wet roller head, dust illumination and anti-tangle technologies.
It can clean everything from fine dust, small debris and hair, to splashes and spillages, all the way to heavier spillages such as ketchup, syrup and oil mist – even stubborn stains such as dried food and toothpaste.
The Clean water tank has a 1 litre capacity whilst the Dirty water tank has a 0.8 litre capacity.
Up to 290sqm, based on Dyson internal calculation with no repeated cleaning on the same area, with 0.5m/s speed. Actual area coverage may vary depending on habits and floor types. We recommend using hydration level 1 to achieve maximum floor coverage on a single fill.
The Dyson WashG1™ doesn’t need to be cleaned manually after every clean. Instead, we recommend using the Self-clean function after each use. We also recommend cleaning the Dyson WashG1™ manually after every three uses.
Dyson WashG1™ wet floor cleaner has 3 modes (levels 1, 2 and 3), plus a MAX setting. Levels 1 and 2 are for dry dust, hair and fibre and low viscosity spillages. Level 3 is for dry debris and high viscosity spillages. MAX setting is for stubborn dirt. You can switch between modes using the silver button. For MAX setting hold down the blue button. Level 1 is recommended for everyday quick cleans and on delicate flooring.
Dyson WashG1™ wet floor cleaner is Dyson’s first dedicated wet floor cleaner for hard floors, picking up both wet and dry debris.
Place the machine on the dock after each clean, to store and charge, ready for next time.
Turn the machine on and off via the red power button underneath the UI screen.
Apart from the charging dock, the Dyson WashG1™ wet floor cleaner has everything you need onboard. No additional accessories.
No, this machine is engineered for hard floors only.
When using floor cleaning solutions, do use gentle, low-foaming common household detergents and do not use bleach. Be sure to follow the solution’s specific direction for dilution - with a 1L clean water tank you shouldn't require any more than 1Tbsp of solution. We also recommend adding the solution after filling the clean water tank.