Dyson Airblade dB logo

Fast hygienic hand dryer, with a HEPA filter as standard

• 10 second dry time1
• Hygienic performance with HEPA filter2
• 5-year parts, 1-year labour warranty

Also available in white

Dyson Airblade dB grey hand dryer

Proven hygienic by independent testing

All Dyson Airblade™ hand dryers undergo rigorous testing by Dyson. The impact of drying hands has been tested in universities and published in international journals.

A scientist studying fibres on computer screens

Key features

Dry hands in just 10 seconds1

Airblade™ technology forces sheets of air through apertures at 690 km/h, literally scraping water from hands, quickly and hygienically.

Scrapes away water at 690 km/h

The Dyson digital motor V4 uses digital pulse technology to spin at up to 90,000rpm – up to three times faster than a conventional motor. So it can draw up to 30 litres of air per second through the machine.

X-ray of Dyson Airblade dB hand dryer

Key technology

  • Dyson Airblade dB hand dryer with motor exposed

    The Dyson digital motor V4

    The reprogrammed Dyson digital motor V4 uses digital pulse technology to draw up to 30 litres of air per second through the machine, for fast hand drying.

  • Close-up of HEPA filter

    HEPA filter

    The HEPA filter captures 99.95% of particles2 as small as 0.1 microns from the washroom air. So hands are dried with cleaner air. Antibacterial coating and touch-free operation helps to prevent the spread of bacteria. So Dyson Airblade™ hand dryers meet every part of NSF Protocol P335, which defines the criteria for hygienic hand dryers.

Additional features

  • Extreme close-up of the top of a Dyson Airblade dB hand dryer

    Engineered to last

    Made from tough, durable ABS polycarbonate, Dyson Airblade™ hand dryers are repeatedly tested for durability and resilience to physical abuse.

  • Dirty washroom setting

    Less waste

    Up to 72% less expensive to run than other hand dryers. Up to 97% less than single-use paper towels, with up to 78% less CO2.3 Creating a better environment in your washrooms and in the world outside.

Accreditations

  • NSF logo

    NSF

    The only hand dryer certified by the NSF International Protocol P335.

  • HACCP logo

    HACCP

    The only hand dryer certified for use in food preparation environments, by the HACCP International standards.

  • Carbon Trust logo

    Carbon Trust

    All Dyson Airblade™ hand dryers are certified by the Carbon Trust.

Specifications

  • Motor switching rate
    6,000 per second


    Airspeed at apertures
    690km/h
    Motor speed
    90,000 rpm

  • Operating airflow
    30 l/s


    Decibel level
    84 dB
    Weight
    8.2kg

  • Casting construction
    Polycarbonate-ABS casing


    HEPA filter
    Yes
    Rated power
    1,600 W

  • Operation lock-out period
    30 sec


    Standby power consumption
    Less than 0.5 W
    Input voltage
    200-240

  • Frequency
    50 & 60 hz


    Height
    661mm
    Length
    247mm
    Width
    303mm

  • Antibacterial coating type
    Moulded additive


    Dry time
    10 seconds
    Motor
    Dyson Digital V4

  • Illustration of Dyson Airblade dB grey hand dryer dimensions

Frequently asked questions

To ensure the machine performs to its best and remains hygienic, the Dyson Airblade™ dB should be cleaned daily. Please refer to the cleaning guide for further information (see above).

There is no limit, however we recommend each machine has its own fused spur that it is connected to.

They are single insulated.

Explore the Dyson Airblade™ hand dryer range

Hands being dried under Dyson Airblade Wash+Dry tap

Why choose Dyson for business

1 Dry time determined using Dyson test method 769 based on NSF P335 to a measurement of 0.1g residual moisture.
2 HEPA filter tested to EN1822-5, by an independent testing laboratory, under prescribed test conditions.
3 The environmental impact of electrical appliances and paper towels was measured by Carbon Trust. The calculations were produced using the software Footprint Expert Pro, based on product use over 5 years and using weighted averages of individual countries of use. Dry times for product were evaluated using DTM 769. Average electricity price US$ 0.1/kWh for the US market, as of May 2019. For calculations visit www.dyson.com.sg/calcs